Surge arrester for Loxone LINK bus
 
For new and existing systems (can be retrofitted)
Simple installation (no complex wiring required, mounting on DIN rail, simple plug-in system)
No defective devices in the event of overvoltage or short circuit (no expensive repair costs)
Increase in reliability and system availability
DIN rail mounting
Certified in a recognized testing institute
 
For new and existing systems (can be retrofitted)
Simple installation (no complex wiring required, mounting on DIN rail, simple plug-in system)
No defective devices in the event of overvoltage or short circuit (no expensive repair costs)
Increase in reliability and system availability
DIN rail mounting
Certified in a recognized testing institute
 
FOR ALL CAN BUS SYSTEMS SUCH AS LOXONE LINK AND LOXONE TREE
 
operating range
Nominal voltage / maximum continuous voltage D+ to GND: -7V to +14V
Nominal voltage / maximum continuous voltage D- against GND: -7V to +14V
Leakage current D+ to GND:  < 1.5µA
Leakage current D- to GND:  <1.5µA
Leakage current D+ to D-:  < 1µA
Insulation resistance at nominal voltage: > 6 MOhm
Capacitance D+ to GND: 75 pF
Capacitance D- to GND: 75 pF
 
Protection level (at overvoltage 10,000 V and 5,000 amperes)
Data lines, D+ to GND: < 620 V (with pulse class C2, 10,000 V (1.2/50 µs) / 5,000 A (8/20 µs)
Data lines, D- to GND: < 606 V (with pulse class C2, 10,000 V (1.2/50 µs) / 5,000 A (8/20 µs)
current limit: The remaining harmful current from the protection level is switched off after 1 µs by current cut
Pulse recovery, D+ to GND: <0.74 ms (measured at 2000 V (1.2/50 µs) / 1,000 A (8/20 µs)
Pulse recovery, D- to GND: <0.85 ms (measured at 2000 V (1.2/50 µs) / 1,000 A (8/20 µs)